Stage 2

This kit uses the DevilsOwn second-generation water–methanol injection controller. This kit is designed for a 1 wire hook up to a 2.5-bar map sensor or for a single boost source run to the DVC-30 controller with built in 30 PSI boost port. Devils Own wants you to have an easy time with this so you can have more time burning tires then reading instructions. To hook this up, run a map sensor signal (2.5 bar controller) or boost signal (DVC-30) to the controller, wire it up to power, ground the wire, and then run the wire to the pump. How simple is that? Customers hook this up quickly and are on the road in no time. As many of you know, this kit will increase your boost timing, and most importantly, you’ll have more power! Another cool feature of the 2nd generation digital variable controller is the ability to hook up a float level sensor, or any other ground trigger, to one of the controller inputs and it will light up the multifunction LED light. This light notifies you of your fluid levels so you aren’t caught with your pants down.

The DevilsOwn Progressive Water-Methanol injection kits main purpose is to suppress detonation caused by high temperature and pressure that has developed in the combustion chamber. This is achieved when the effective compression ratio has been taken beyond the auto-ignition point. Devils Own wants this process to be easy to understand, and customers should know this kit is good to go in a turbo or a supercharged engine.

System Contents Include:

• Devils Own progressive controller
• 300 psi pump with EPDM seals
• Heavy duty nickel plated check valve
• 15 ft of black high pressure nylon tubing
• 2 Micro droplet nozzles DO3,DO7
• Filtered self-sealing tank tap
• All necessary hardware
• Detailed Instructions