List Price:$258.56
Price: $245.64
Item #: MZXM00003B -
It is well known that the stock rear motor mount on the MS3 is a weak link and cp-e has chosen to think outside the box on this and come up with a completely new design. To do this cp-e carefully studied the layout of the stock MS3 Engine Mounts.... [more info...]
|
Item #: FDDP00001T/2T -
Matching the stock turbo, the cp-e Focus ST downpipe includes a CNC lathed V-Band flange for easy installation and stock compatibility. This downpipe is crafted from premium "bright annealed" 304 stainless steel and is mandrel bent throughout... [more info...]
|
Item #: MZTE00001 -
Looking for a little more out of your 2010+ MazdaSPEED3 exhaust? Introducing the cp-e™ Triton™ 3" cat back exhaust for the 2nd Generation MazdaSPEED3's. Featuring a full 3" Stainless Steel mid pipe, two cp-e™ designed resonators, and dual 4"... [more info...]
|
List Price:$308.61
Price: $293.18
Item #: FDXM00003B -
It is well known that the stock rear motor mount on the Focus ST is a weak link. Custom Performance Engineering, Inc. has chosen to think outside the box on this and come up with a completely new design. To do this, cp-e™ carefully studied the... [more info...]
|
Item #: HYBH00001 -
Introducing the cp-e™ BOV upgrade kit for the 2.0T Genesis Coupe. Featuring a solid cast elbow with either an HKS or Tial flange welded on for use with BOV valves. An upgraded BOV provides better response and performance especially when raising... [more info...]
|
Item #: FDTH00001B -
Finally 3 pumps for the legendary SN95 mustang. This platform has created a massive following with amazing aftermarket support – there are virtually no limits to what has been done to any of the powertrains available for this chassis. With any need... [more info...]
|
Item #: FDCK00006 -
After months of engineering and development, cp-e™ is proud to release the Lightweight ΔCore Front Mount Intercooler for the Focus ST. The stock intercooler does an excellent job for the everyday driver that doesn’t want to modify their car.... [more info...]
|
Item #: MZDP00001/2T -
Following the same successful recipe used for the Custom Performance Engineering Mazdaspeed 6 downpipe, the Mazdaspeed 3 downpipe replaces the choked factory pipe and its two restrictive cats with one high-flow cat and a 3” mandrel-bent pipe. The... [more info...]
|
Item #: MZDP00003/4T -
The stock, two-piece downpipe on the Mazdaspeed 6 is one of several parts that stifles the performance potential of the turbocharged and intercooled MZR engine. It has crimps, bends, two catalytic converters, and a constrictive diameter. These... [more info...]
|
Item #: FDCK00001 -
Have a non-USDM Focus ST? No Problem! Now our intercooler includes a free adapter that will work with non-USDM MAP sensors.After months of engineering and development, cp-e is proud to release the ΔCore Front Mount Intercooler for the Focus ST. The... [more info...]
|
List Price:$535.50
Price: $508.73
Item #: FDFB00002B -
Supplying fuel is key to achieving power consistently and safely. The FuelBar Ford Focus ST Aux Fuel Rail by Custom Performance Engineering, Inc. are milled from a solid block of 6061 aluminum and are engineered to optimize fuel delivery. The kit... [more info...]
|
List Price:$47.65
Price: $45.27
Item #: UMMP00003B -
Need a boost/vacuum source for your aftermarket BOV, wastegate, or boost gauge? Look no further than our MAPtap intake manifold pressure reference adapter. These adapter plates are CNC machined from billet aluminium and include all necessary... [more info...]
|
Item #: MZHV00002B -
CPE HavocRails™ Fuel Rail Add-On
Every Havoc Intake Manifold ships with pilot holes pre-drilled for an easy port fuel addition. When it’s time to add port fuel injection, the customer can drill these holes out at home with a simple hand drill. These holes along with this HavocRail... [more info...]
|
Item #: FDXT00001P/B -
The Focus community voiced their opinion, and cp-e has heard their call! Introducing the HEXtip Exhaust Tip for the Ford Focus ST. This tip has been designed to integrate flawlessly with the cp-e Austenite Exhaust System, and provide a tip that has... [more info...]
|
Item #: FDHC00001B/R/Y -
cp-e is excited to release their hot side charge pipe upgrades for the Focus ST.Setting out to replace the stock pipe, cp-e has not only managed to design an upgrade solution with an aluminum pipe, but has designed a solution with a 2.50” diameter... [more info...]
|
List Price:$247.65
Price: $235.27
Item #: MZSS00001Z -
In the high horsepower quest of the MZR 2.3 DISI, enthusiasts have hit many roadblocks. One of the strangest roadblocks faced was that increasing the horsepower meant increasing the cylinder pressure and as a result the load on the fuel injector... [more info...]
|
List Price:$105.13
Price: $99.87
Item #: MZTP00002B -
Mounting the license plate directly in the center of the Mazda 3 and Mazdaspeed 3’s front bumper not only detracts from the visual appeal of the vehicle, but it also blocks airflow to cooling devices such as your radiator and aftermarket front... [more info...]
|
Item #: MZXM00004/5B -
It is finally time to get the power to the wheels! cp-e is proud to release the driver side engine mount for the Mazdaspeed 3 gen1 and gen2. Our side mounts have been a long time in the making. We have been testing the cp-e side mounts for more... [more info...]
|
Item #: FDXM00005/6B -
It is finally time to get the power to the wheels! cp-e is proud to release the Focus ST Driver Side Mount. Our side mounts have been a long time in the making. We are confident that these will be the last side mounts you will ever need.Focus ST... [more info...]
|
Item #: MZXM00006/7B -
It is finally time to get the power to the wheels! cp-e is proud to release the passenger side engine mount for the Mazda 3 and Mazdaspeed 3 gen1 and gen2. Our side mounts have been a long time in the making. We have been testing the cp-e™ side... [more info...]
|
Item #: FDXM00007B/8B -
It is finally time to get the power to the wheels with the cp-e Ford Focus ST PSMM! cp-e™ is proud to release the Focus ST Passenger Side Mount. Our Ford Focus ST PSMM has been a long time in the making. We are confident that these will be the last... [more info...]
|
List Price:$349.12
Price: $331.67
Item #: MZXM00009B -
As a testament to their engineering and design, the cp-e equipped MazdaSPEED6's have been making more power than ever. And while breaking this new ground they are breaking more parts! Last year the first broken differential mount was delivered to... [more info...]
|
Item #: MZXM00010B -
The OEM wishbone engine mount on the Mazda 6 has been known to be a weak link. One of the biggest issues is the OEM rubber which will tear with any kind of spirited driving. After consulting with many enthusiasts and Mazda dealers, Custom... [more info...]
|
Item #: UNXM00001B/2B -
Custom Performance Engineering offers the first aftermarket EPDM (ethylene propylene diene monomer) rubber engine mount for the Mazda 3 / MazdaSPEED 3! CNC machined from a single piece of billet 6061-series aluminum; this mount is not only totally... [more info...]
|
List Price:$165.30
Price: $157.04
Item #: UNAS00001B -
Introducing the cp-e™ AirStation™, the clean and simple vacuum block you have been waiting for! Machined out of billet aluminum, this piece was designed with a goal to create something clean, sleek, and small. Measuring only 1¼” x 2½” x 4”, the... [more info...]
|
Item #: MZCK00002 -
The 2010 MazdaSPEED3 has a lot of potential and for those that want to get the most out of the engine, cp-e™ has designed a front mount intercooler (FMIC). The factory top mount intercooler (TMIC) leaves a lot to be desired, its biggest flaw is... [more info...]
|
Item #: CPECLKG -
Filter Cleaning/Restore Kit
Every filter sold with a CPE intake system is washable and reuseable. For this, we offer a Green Filter “Restore Kit,” which includes cleaning solution and oil spray. The oil was specifically engineered to attract as little dirt and dust as... [more info...]
|
List Price:$126.16
Price: $119.85
Item #: MZBH00002M -
The MazdaSPEED3 Vehicles use a by-pass-valve (BPV) system to recirculate excess pressure from the turbo when the throttle closes. When upgrading from the factory valve – it’s important to maintain this system.FEATURES: CNC Billet aluminum adapter... [more info...]
|