AWR Racing Right Engine Mount for Mazda 6 s (3.0L)
Item #: AWR-6301-HV6
Price:$229.95
Price: $229.95Sale: $229.95
Status:
Ships in 2-3 weeks
Stiffness: |
Complete mount on top right of engine bay at heads for V6 Mazda6 with standard transmissions from 2003 to 2008. Mount is available in 70, 88, or 95 durometer solid urethane bushings. Improves drive-line response by inhibiting driveline lash, putting all that motion to the task of moving the car along.
Completely new fabricated and reinforced mount made out of 7 gauge cold rolled steel. Laser cut and CNC folded. Fixture, Tig Welded. Powder coated silver. Polyurethane bushings with steel inner sleeve. The 88 durometer bushings are firm, and the 95 durometer are only recommended for racing, as they are too hard for the street and may cause undesirable resonance in the car. For street applications, order the mounts with the 70 or 88 durometer bushings.
Mazda 6s, Manual, wagon, 2007
Good, durable, reliable part. One problem, missing a mount point for the ground wire. Needs a ground wire extended to the engine side, top portion of the mount to one of the three engine studs or else no ground. Provided bottom mounting point for the ground wire is useless since there is no metal to metal contact between the engine and the bottom portion of the mount. Also don't tighten the three engine studs too much, they are very fragile and snap easily in fact be careful don't overtighten any of the nuts and bolts.